OEM/ODM Supplier Turning And Boring Lathe - Gear Hobbing Machines Y38-1 – Hoton
OEM/ODM Supplier Turning And Boring Lathe - Gear Hobbing Machines Y38-1 – Hoton Detail:
FEATURES:
Gear hobbing machines are intended for hobbing spur and helical gears as well as worm wheels.
The machines permit cutting by climbing hobbing method, in addition to conventional hobbing method, to raise the productivity of the machines.
A rapid traverse device of hob slide and an automatic shop mechanism are provided on the machines allowing several machines to be handled by one operator.
The machines are easy in operation and convenient to be maintained.
|
Model |
Y38-1 |
|
|
Max module(mm) |
Steel |
6 |
|
Cast iron |
8 |
|
|
Max diameter of workpiece(mm) |
800 |
|
|
Max hob vertical travel(mm) |
275 |
|
|
Max cutting length(mm) |
120 |
|
|
Distance between hob center to worktable axis (mm) |
30-500 |
|
|
Diameter of changeable axis of cutter(mm) |
22 27 32 |
|
|
Max hob diameter(mm) |
120 |
|
|
Worktable hole diameter(mm) |
80 |
|
|
Worktable spindle diameter(mm) |
35 |
|
|
No. of hob spindle speed |
7steps |
|
|
Hob spindle speed range(r.p.m) |
47.5-192 |
|
|
Range of axial step |
0.25-3 |
|
|
Motor power(kw) |
3 |
|
|
Motor speed (turn/min) |
1420 |
|
|
Pump motor speed (turn/min) |
2790 |
|
|
Weight (kg) |
3300 |
|
|
Dimension (mm) |
2290X1100X1910 |
|
Product detail pictures:
Related Product Guide:
Better biomedical devices, wearable displays may result from tiny light-guiding structures | Metal Craft Pipe Bender
Better biomedical devices, wearable displays may result from tiny light-guiding structures | Cnc-Controlled Flatbed Lathe
The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for OEM/ODM Supplier Turning And Boring Lathe - Gear Hobbing Machines Y38-1 – Hoton , The product will supply to all over the world, such as: Maldives , Kenya , Portugal , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Hilda
from Bangalore
- 2015.09.23 17:37
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Pamela
from Malaysia
- 2016.08.16 13:39
